Asus W90V Hardware User Manual page 69

System BIOS Settings (cont.)
RAID Function Support (on selected model)
For models that support RAID function, you must set the RAID item in the BIOS Setup before you can
create a RAID set from the built-in hard disk drives.
WARNING! Building a RAID set will clear all your data on both the primary disk drive
and the secondary disk drive, including Express Gate. Ensure that you've made a
backup before creating a RAID set.
IMPORTANT! Select "Reset Disks to Non-RAID" to reset the hard disk drive if you
want to set SATA Operation Mode to [Enhanced] in BIOS or use the hard disk in other
computers, otherwise the hard disk drive will not function normally.
The recovery partition will be deleted after you create a RAID set. You can only install
the system OS with a retail OS disc.
Only models with two hard disk drives may support this RAID function and the hard-
ware supports RAID 0 only.
IMPORTANT! If you want to reset the hard disk drive to NON-RAID, remember to re-
move the optional secondary hard disk drive before installing OS and drivers on your
notebook PC.
IMPORTANT! After you build a RAID set
on your Notebook PC, DO NOT select
Load Driver before installing OS on your
notebook PC.
A
Appendix
A-