Epson ELPLP29 User Manual page 54

Troubleshooting > When You Suspect a Problem
f The remote control does not work
• Is direct sunlight or strong light from
fluorescent lamps shining onto the remote
control infrared receiver?
• Is the remote control too far from the
projector?
• When in use, is the remote control infrared
transmitter facing the remote control infrared
receiver on the projector?
• Has the battery insulating tape been
removed?
• Is the battery dead?
• Is the battery inserted correctly?
• Is the battery installed?
f The power does not turn off (after the [Power] button is pressed)
• The power indicator remains orange.
• The cooling fan does not stop.
s "Using the Remote Control" P.9
The operating distance for the remote control is approximately 6m (20ft.).
s "Operating range" P.9
The operating angle for the remote control is approximately ±30½°
horizontally and approximately ±15½° vertically.
P.9
s "Before using the Remote Control" P.9
s "Changing the battery (Remote Control, Presentation Remote
Controller)" P.56
This projector is designed so that the Power indicator remains lit even after
the power has been turned off. The Power indicator will switch off when
the power cable is disconnected from the electrical outlet.
After the [Power] button has been pressed, the cool-down period begins.
After this, the Power indicator changes to a steady orange, and you can
then disconnect the power cable from the electrical outlet.
Cool-down lasts for about 20 seconds.
s "Operating range"
53