Advanced Operation > Configuration Menus
f Info menu
Sub menu
Lamp Hours
Source
Input Signal
(Computer images only)
Video Signal
(Video images only)
Resolution
(Computer images only)
Refresh Rateg
(Computer images only)
Computer images
Displays the cumulative lamp operating time. From 0 to 10 hours, 0H is displayed. After 10 hours, the usage
time is displayed in hourly increments.
• When the accumulated usage time of the lamp reaches about 1900hours, a warning will be displayed in red.
Displays the input source being projected.
Displays the input signal settings.
Displays the Video signal format.
Displays the input resolution.
(Does not appear when the input source is composite video or S-Video.)
Displays the refresh rate
(Does not appear when the input source is composite video or S-Video.)
Video images
Function
40