Cub Cadet RZT 17 Operator's Manual page 15

Rzt series tractor with 42" mower deck
Hide thumbs Also See for RZT 17:
Table of Contents

Advertisement

Adjust
the
operator's
comfortable position that allows you to operate
the controls. See seat adjustment in the
ADJUSTMENTS section.
Release the parking brake.
Move the RH and LH drive control levers inward
in the neutral position. See Figure 9.
Control Lever Moved
Inward and in Neutral
Figure 9
Move the throttle control lever forward to the full
throttle position (3500-3600 RPM). Make certain
the throttle control has not been moved too far
forward into the "Choke" position.
NOTE: The tractor and engine are designed to run at
full throttle. However, if performing a practice session,
it is preferable that the tractor is operated at half
throttle (approximately 2500-2600 RPM), but this only
applies to practice operation.
To drive the tractor, firmly grasp the respective
drive control levers with your right and left hands
and proceed as follows :
WARNING: Always maintain a firm grip
on the control levers. DO NOT release the
control levers to slow or stop the tractor;
move the levers to the neutral position
using your hands.
Driving the Tractor Forward
WARNING: Keep all movement of the
drive control levers slow and smooth.
Abrubt movement of the control levers
can affect the stability of the tractor and
could cause the tractor to flip over,
which may result in serious injury or
death to the operator.
Slowly and evenly move both drive control levers
forward. The tractor will start to move forward.
See Figure 10.
As the control levers are pushed farther forward
the speed of the tractor will increase.
seat
to
the
most
DRIVING FORWARD
Neutral
Position
To slow the tractor move the controls lever
rearward to attain the desired speed, or move the
levers to the neutral position to stop the tractor.
IMPORTANT: Always maintain your grasp on the
drive control levers. Do not release the levers to
slow the tractor or to return to neutral.
Turning the Tractor While Driving Forward
WARNING: When reversing the direction
of travel, we recommend performing
gradual
Sharper turns increase the possibility of
turf defacement, and could affect control
of the tractor. ALWAYS slow the tractor
before making sharp turns.
To turn the tractor while driving forward, move the
control levers as necessary so that one lever is
rearward of the other. The tractor will turn in the
direction of the rearward control lever.
- To turn to the left, move the left drive control
lever rearward of the right lever. See Figure 11.
FORWARD LEFT TURN
15
Faster
Slower
Figure 10
'U'
turns
where
Figure 11
possible.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents