Positioning Your Zotac Zbox; Installing The Stand; Installing Your Zotac Zbox To A Monitor - Zotac ZBOX series User Manual

Hide thumbs Also See for ZBOX series:

Table of Contents

ZOTAC ZBOX

Positioning your ZOTAC ZBOX

Do not position the ZOTAC ZBOX where the ventilation holes are covered. To



guarantee proper use, leave 4 inches (10 cm) spacing in front of the ventilation

holes.

ZOTAC mini-PC system provide ample connectivities in tiny space, please choose



connectors and cables in appropriate size to avoid interference.

Erect your ZOTAC ZBOX with the supplied stand. To do so :

Locate the screw hole on the bottom of the ZOTAC ZBOX.

Align the stand screw to the PC screw hole and then secure the Stand to the PC

with a coin.

Do not place your ZOTAC ZBOX on the desktop without the stand.



You can also install your ZOTAC ZBOX to the back of a monitor. To do so:

Secure the VESA mount to your monitor with four screws (HNM/M4x8).

Place your ZOTAC ZBOX on the VESA mount noting the correct alignment and

then secure the PC to the VESA mount with a coin.

To fasten the VESA mount, your monitor must comply with VESA75 Or VESA100



standard.

Mechanical Loading Stability - Mounting of the equipment on the backside of the



monitor should be lay this equipment on a reliable surface when install. A drop or

fall could cause injury.

Table of Contents