Customizing The Zotac Zbox; Installing A Memory Module - Zotac ZBOX miniHTPC User Manual

ZOTAC ZBOX

Customizing the ZOTAC ZBOX

Before installing hardware, please follow the instructions below to remove the cover of your
ZOTAC ZBOX.
1. Remove the two screws securing the bottom cover into place.
2. Gently remove the cover as the shown in the image below.

Installing a memory module

1. Locate the SO-DIMM memory slots and insert a SO-DIMM memory module into the slot
at a 45 degree angle.
Note:When installing two SO-DIMM memory modules, please insert a module into the lower slot first.
8