Set Menu; Set Menu List; Adjusting The Items On The Set Menu - Yamaha HTR-5630RDS Owner's Manual

You can set the following parameters on the set menu to
obtain a better sound from the unit. Change the settings to
reflect the needs of your listening environment.

Set menu list

The set menus are divided by use and function into the 4
categories listed here.
I BASIC
The BASIC area contains the basic parameters that you
must set before using this unit. It consists of the following
menus. See pages 18 – 20 for a detailed explanation.
1 SETUP
2 SP LEVEL (Speaker level)
I SOUND
The SOUND area contains parameters for altering sound
output. It consists of the following menus that you can
use to alter the quality and tone of the sound output by the
system.
1 SPEAKER SET
2 SP DISTANCE (Speaker distance)
3 LFE LEVEL (Low frequency effect level)
4 D. RANGE (Dynamic range)
5 CENTER GEQ (Center graphic equalizer)
6 HP TONE CTRL (Headphone tone control)
I INPUT
The INPUT area contains parameters concerned with
signal input. It consists of the following menus that you
can use to change the assignment of input jacks.
1 I/O ASSIGN
2 INPUT MODE
I OPTION
This is a supplementary set up menu provided for your
convenience. It consists of the following menus that you
can use to change display brightness, protect existing
settings, and perform other non-essential functions.
1 DISPLAY SET
2 MEM. GUARD
3 AUDIO MUTE
• In the descriptions for each item from the following page, the
default setting is indicated in bold.

SET MENU

Adjusting the items on the set
menu
Use the remote control to make adjustments.
2,4,7
y
• You can change set menu parameters while the unit is
reproducing sound.
• You can use NEXT and SET MENU +/– on the front panel to
change these settings, if the unit is not set to TUNER mode.
Press NEXT to select the category or field you wish to change,
and SET MENU +/– to change the parameters.
Note
• You cannot change some set menu parameters while the unit is
in night listening mode.
1
Press SET MENU to enter
the set menu.
2
Press u / d repeatedly to
select the desired menu.
3
Press –/+ to enter the
selected menu.
4
Press u / d repeatedly to
select the item you want
to adjust.
y
• By pressing SET MENU repeatedly, you can select items in
the same order as when pressing d.
PROG PROG
MUTE
LEVEL SET MENU
1
VOLUME
3,5,6
SET MENU
39