Epson 550 User Manual page 58

4. Click
of the screen. One of the monitor icons
automatically moves on top of the other.
If you're using a Macintosh with OS 9.x or earlier:
1. From the Apple menu, select
Control Panels
Monitors and Sound
2. Click the
then drag one monitor icon on
top of the other.
If the
Arrange
may need to select one of the Simulscan
resolutions. Click the
then select a Simulscan resolution from
the
Resolution
seconds for the projector to sync up.)
The picture is upside-down or reversed.
Change the
Projection
Only part of the picture is displayed, or the picture is distorted.
■
Press the
■
If the Aspect is set to
top or bottom section of the screen so that subtitles are visible (see page 43).
■
Check the
■
Use the
Position
■
If you've connected a computer and you see only half the image, make sure the
computer's Dual Display setting is turned off.
58
Problem Solving
in the lower corner
Mirror Displays
, then click
.
icon, and
Arrange
option isn't available, you
icon and
Monitor
box. (Allow a few
setting in the Settings menu (see page 45).
button to select a different aspect ratio (see page 26).
Aspect
, you may need to use the
Zoom
to make sure it's adjusted correctly (see page 43).
Output Scaling
setting to reposition the image on the screen (see page 43).
Click here
Zoom Caption
Click here
Drag one
monitor icon on
top of the other
option to see the