Table of Contents
Advertisement
If you press the
button on the projector, you see a menu of available sources. Press the
Source
u or d button to highlight a source and press the
button.
Select
If you select the Input A source using either the remote control or the menu above, you may
see the Input A menu:
Press the u or d button to highlight
(for component video with an NTSC signal) or
YCbCr
(for component video with an HDTV signal), or select
so the projector can
YPbPr
Auto
automatically detect the Input A source type. Then press the
button.
Select
Note:
If an image does not appear, check the troubleshooting tips on page 57.
To temporarily turn off the image and darken the screen, press the Blank button. Press the Blank
button again to return to normal viewing.
23
Setting Up the Projector
Hide quick links:
Advertisement
Table of Contents
