4. Squeeze the lens cap tabs and remove the lens cap.
5. Press the red
Power
Power
button
The power light flashes green as the projector warms up, and the
projection lamp comes on in about 30 seconds. The power light
stays green.
You may see the EasyMP main screen or a presentation that has
been saved on the memory card and set to run automatically.
Squeeze here
button on top of the projector.
caution
Do not use the projector with
the lens cap in place. The
heat generated by the lens can
damage the cap.
power light
warning
Never look into the lens when
the lamp is on. This can
damage your eyes, and is
especially dangerous for
children.
Using the Projector
21