Craftsman 315.281260 Operator's Manual page 15

[] Insert t hehexkeyintothe chuckandtighten the chuck
jawssecurely. Tapsharply witha malletina counter-
clockwise direction. Thiswillloosen thechuckonthe
spindle. I t cannowbeunscrewed b yhand.
MALLET
CHUCK
TO RETIGHTEN A LOOSE CHUCK
The chuck may become loose on the spindle and develop
a wobble. Also, the chuck screw may become loose,
causing the chuck jaws to bind and prevent them from
closing. To tighten:
[] Unplug the drill.
[] Open the chuck jaws.
[] Insert a hex key into the chuck and tighten chuck jaws
securely. Tap the hex key sharply with a mallet in a
clockwise direction. This will tighten the chuck on the
spindle.
[] Open the chuck jaws and remove the hex key.
[] Tighten the chuck screw.
HEXKEY
Fig. 11
A
Look for these accessories at Sears retail:
[] High Speed Bits (For wood or metal) ............................................................................................................. 1/2 in. Max.
[] Masonry Bits ................................................................................................................................................... 3/4 in. Max.
[] Wood Boring Bits ........................................................................................................................................ 1-1/4 in. Max.
[] Hole Saws ................................................................................................................................................... 2-1/2 in. Max.
[] Drill Stand
[] Doweling Jig
_, WARNING; Current attachments and accessories available for use with this product are listed above. Do not use
any attachments or accessories not recommended by the manufacturer of this product. The use of attachments or
accessories not recommended can result in serious personal injury.
15