Table of Contents
Advertisement
Available languages
Available languages
27. USEonlyasdescribed inthis instruction m anual.
USEaccessories onlyrecommended bySears.
28.
USE RECOMMENDED
SPEEDS for all operations.
Other speeds may cause the machine to malfunc-
tion causing damage to the drill press and or
serious injury.
29. REMOVE ADJUSTING
KEYS AND WRENCHES.
Form habit of checking to see that keys and adjust-
ing wrenches are removed from tool before turning
it on.
30. USE RIGHT TOOL. Don't force tool or attachment
to do a job for which it was not designed.
31. Information regarding the safe and proper operation
of this tool is also available from the following
sources:
Power Tool Institute
1300 Summer Avenue
Cleveland, OH 44115-2851
www.powertoolinstit ute.org
National Safety Council
1121 Spring Lake Drive
Itasca, IL 60143-3201
American National Standards Institute
25 West 43rd Street, 4th floor
New York, NY 10036
www.ansi.org
ANSI 01.1 Safety Requirements for
Woodworking
Machines, and the
U.S. Department of Labor regulations
www.osha.gov
32. SAVE THESE INSTRUCTIONS.
Refer to them
frequently and use them to instruct other users.
ADDITIONAL
SAFETY
RULES
FOR THE LASER
1.
LASER LIGHT - DO NOT STARE INTO BEAM,
APERTURE, or into a reflection from a mirror-like
surface.
.
.
AVOID EXPOSURE - LASER LIGHT IS EMITTED
FROM BOTH SIDES OF LASER ASSEMBLY.
Use of controls or adjustments, or performance of
procedures other than those specified herein may
result in hazardous laser light exposure.
DO NOT DISASSEMBLE
LASER MODULE.
The
laser is a CLASS II LASER PRODUCT that can
emit laser power up to 1 mW MAX at 635 rim,
which could result in exposure with the module
disassembled.
The laser unit complies with 21
CFR 1040.10 and 1040.11.
.
.
USE OF CONTROLS OR ADJUSTMENTS
OR
PERFORMANCE
OF PROCEDURES
OTHER
THAN THOSE SPECIFIED
HEREIN MAY RESULT
IN HAZARDOUS
RADIATION EXPOSURE.
The use of optical instruments with this product will
increase eye hazard.
AVAILABLE
ACCESSORIES
Visit your Sears Hardware Department or see the
Craftsman Power and Hand Tool Catalog for the
following accessories.
ITEM
STOCK NUMBER
* Circle Cutter
25293
* Clamping Kit
26426
* 8-in. Vise
24077
* 4-in. Vise
24081
* 3-in. Vise
24071
* 21 pc. Sanding Drum Kit
25262
Sears may recommend other accessories not listed in
this manual.
See your nearest Sears Hardware Department or
Craftsman Power and Hand Tool Catalog for other
accessories.
Do not use any accessory unless you have completely
read the Instruction Manual for that accessory.
Use only accessories recommended
for this drill press.
Using other accessories may cause serious injury and
cause damage to the drill press.
Advertisement
Table of Contents
