Table of Contents
Advertisement
4. Use the arrow buttons on the remote control or the
projector to set these options:
■ Position
See "Repositioning the Picture" on page 22.
■ Zoom Caption
Adjusts both the length of the picture and its vertical position on the screen. You can
adjust this function only when you've selected the
■ Keystone
Corrects vertical keystone distortion of the image (when your image looks like
). This procedure makes the image smaller.
■ Projection
Selects the projection method, as follows:
Setting
Front
Front/Ceiling
Rear
Rear/Ceiling
■ Setup Level
If you are using the projector with non-standard video equipment that has different
black level settings, use this setting to adjust the level of black in the image. See the
documentation that came with your video equipment for more information.
5. Select the
Operation
■ Sleep Mode
When sleep mode is on, the projector turns off the lamp if it has not received any
input signals for the specified amount of time (5, 10, or 30 minutes). You can also
turn sleep mode off.
■ Child Lock
When this feature is on, the projector will not come on unless you press and hold the
button on the control panel for three seconds. (The remote control
Power
P
operates normally.)
Projector position
Projector is in front of the screen
Projector is in front of the screen,
positioned upside-down on a shelf or
mounted upside-down on the ceiling
Projector is behind the screen
Projector is behind the screen, mounted
upside-down from the ceiling
(for component video, S-video, and NTSC video only)
option to make changes to these settings:
,
,
or
buttons on the
aspect ratio.
Zoom
or
21
Advertisement
Table of Contents
