Table of Contents
Advertisement
TOOL USE AND CARE SAFETY
/iX WARNING:
BE SURE to read and understand all instructions before
]
operating this saw. Failure to follow all Instructions listed below may result In
1
electric shock, fire and/or serious personal Injury.
I ALWAYS use clamps or other practical ways to secure and support the
workptece to a stable platform. Holding the work by hand or against your body
is unstable and may lead to loss of control
2 DO NOT force the tool. Use the correct tool and blade for your application,
The correct tool and blade will do the job better and safer at the rate for which it is
designed
3 DO NOT use the tool if switch does not turn It "On" or "Off". Any tool that
cannot be controlled with the switch is dangerous and must be repaired
4 DISCONNECT the plug from the power source before making any
adjustments, changing accessories or storlng the tool. Such preventive safety
measures reduce the risk of starting the tool accidentally
5r NEVER leave the tool running. ALWAYS turn tt off, DO NOT leave the tool until
it comes to a complete stop
6, STORE idle tools out of the reach of chtldren and other untrained persons,
Tools are dangerous in the hands of untrained users
7, MAINTAIN tools with care. Keep cutting tools sharp and clean. Properly
maintained tools with sharp cutting edges are less likely to bind and are easier to
control,
8, CHECK for mlsallgnment
or binding of moving parts, breakage of parts, and
any other condition that may affect the tool's operation If damaged, have the tool
serviced before using Many accidents are caused by poorly maintained tools
9 USE ONLY accessories that are recommended
for this tool. Accessories that
may be suitable for one tool may become hazardous when used on another tool
ELECTRICAL SAFETY
[ _WARNING:
Do not permlt fingers to touch the terminals of plug when
installing or removing the plug from the outlet.
! Double Insulated tools are equipped with a
polarized plug (one blade is wider than the
other).Thls plug will fit In a polarized outlet
only one way, If the plug does not fit fully in the
outlet, reverse the plug If it still does not fit,
contact a qualified electrician to install a
polarized outlet Do not change the plug in any
way
2 Double insulation_l eliminates the need for the
three-wire grounded power cord and grounded
power supply system Applicable only to
Class I1(double-insulated) tools
This contractor's circular saw Is a double
Insulated tool.
Cover of
Grounded
Outlet Box
@
I
®
@
Advertisement
Table of Contents
