Damage Prevention And Information Messages - Craftsman 320.25817 Operator's Manual

71/4-in.contractor's circular saw
Table of Contents

Advertisement

The purpose of safety symbols is to attract our attention to possible dangers
The safety symbols, and the explanations with them, deserve your careful
attention and understanding.
The symbol warnings DO NOT by themselves
eliminate any danger_ The instructionsand warnings they give are no substitutes
for proper accident prevention measures,,
!ik WARNING:
BE SURE to read and understand all safety Instructions
tn
this manual, including
all safety alert symbols such as "DANGER",
"WARNING"
and "CAUTION",
BEFORE using this saw. Failure to follow all instructions
listed below may result In electric shock, ftre and/or serious personal Injury.
SYMBOL
MEANING
[//_
AFETY ALERT SYMBOL: IndicatesDANGER, WARNING, O R
CAUTION. May be used In conjunction
with other symbols or
plctographs
Failure to obey this safety warning WILL result In death or
serious Injury to yourself or to others. Always follow the
safety precautions
to reduce the risk of fire, electric shock
and personal Injury.
Failure to obey this safety warning CAN result in death or
serious Injury to yourself or to others. Always follow the
safety precautions
to reduce the risk of firs, electric shock
and personal Injury.
Falture to obey this safety warning MAY result In personal
Injury to yourself or others or property damage, Always
follow the safety precautions to reduce the risk of fire,
electric shock and personal Injury,
DAMAGE PREVENTION AND INFORMATION MESSAGES
These inform user of Important
Information
and/or Instructions that could lead to
equipment or other property damage if not followed
Each message is preceded by the
word "NOTE:" as in the exampfe below:
NOTE: Equipment and/or property damage may result If these Instructions are
not followed.
WEAR
YOUR
Z_WARNING:
The operation of any tool with a circular
blade can result in foreign objects being thrown Into
your eyes, which can result In severe eye damage.
Before beglnnlng power tool operation, ALWAYS wear
safety goggles or safety glasses with side shield and a
full-face shield when needed. We recommend a Wide
Vision Safety Mask for use over eyeglasses or standard
safety glasses with side shield, available at Sears Retail
Stores.

Advertisement

Table of Contents
loading

Table of Contents