Slope Guide - Craftsman 917.773710 Owner's Manual

Is- SLOPE UIDE
........ "O'"_'_R'_'8 SIGHT AND HOLD THIS GUIDE LEVEL WITH A VERTICAL
I ! ..,!:. ............... TREE, A CORNER OF A STRUCTURE, A POWER LINE
| s . :_::... I............. POLE, OR A FENCE,
! _: J . " ............
I , .....
I _ _=.,t ' =_=-----_ f__-_.¢J_]'_L_ .........
I .. _ _ i_am w.==
i _ "" I Operate a trimmer across the face
i I_=,_Z,,,=_I of slopes, never up or down slopes.
1
1
10 DI ES
15 DEGREES
(.O
Use this guide and do not trim on a slope greater than 15 degrees.
A 10 degree slope is a hill that increases In height at approximately 1.7 feet in 10 feet.
A 15 degree slope Is a hill that Increases In height at approximately 2.5 feet in 10 feet.
Use extreme care at all times and avoid sudden turns or maneuvers. Follow other Instructions in this
manual for safety in trimming on slopes. Operate a trimmer across the face of slopes, never up or down
slopes. Use extra care when operating on or near slopes and obstructions.