Craftsman 917.297350 Owner's Manual page 2

SAFETY RULES
Safe Operation Practices for Walk-Behind Powered Rotary Tillers
TRAINING
* Read the Owner's Manual carefully. Be thoroughly
fam!Iiar with the controls and the proper use of the
equipment. Know how to stop the unit and disengage
the controls quickly°
* Never allow children to operate the equipment. Never
allow adufts to operate the equipment without proper
instruction.
• Keep the area of operation clear of all persons, particu-
larly small children, and pets.
PREPARATION
• The roughly inspect the area where the equipment is to
be used and remove all foreign objects.
• Disengage ail clutches and shift into neutral before
starting the engine (motor).
• Do not operate the equipment without wearing ad-
equate outer garrnents_ Wear footwear that will im-
prove footing on slippery surfaces,
• Handle fuel with care; it is highly flammable_
• Use an approved fuel container.
• NevJ add fuel to a running engine or hot engine.
° Fill fuel tank outdoors with extreme care. Never fill
fuel tank indoors.
• Replace gasoline cap securely and clean up spilled
fuel before restarting.
• Use extension cords and receptacles as specified by
the manufacturer for all units with electric drive motors
or eiectdc starting motors.
• Never attempt to make any adjustments while the
engine (motor) is running (except where specifically
recommended by manufacturer).
OPERATION
• Do not put hands or feet near or under rotating parts.
o Exercise extreme caution when operating on or cress-
mg gravel drives, walks, or roads. Stay alert for hidden
hazards or traffic. Do not carry passengers.
° After striking a foreign object, stop the engine (motor),
remove the wire from the spark plug, thoroughly in-
spect the tiller for any damage, and repair the damage
before restarting and operating the tiller°
• Exercise caution to avoid slipping or falling.
• If the unit should start to vibrate abnormally, stop the
engine (motor) and check immediately for the cause.
Vibration is generally a warning of trouble.
• Stop the engine (motor) when leaving the operating
position.
• Take all possible precautions when Ieaving the ma-
chine unattended. Disengage the tines, shift into
neutral, and stop the engine.
• Before cleaning, repairing, or inspecting shut off the
eng ne and make certain all moving parts have stopped.
Disconnect the spark plug wire, and keep the wire
away from the plug to prevent accidental starting.
Disconnect the cord on electric motors.
• Donot run the engine indoors; exhaust fumes are
dangerous.
• Never operate the tiller' without proper guards, plates,
or other safety protective devices in place.
• Keep children and pets away.
• Do not overload the machine capacity by attempting to
till too deep at too fast a rate°
• Never operate the machirTe at high speeds on slippery
surfaces. Look behind an# use care when backing_
° Never allow bystanders near the unit.
• Use only attachments and accessories approved by
the manufacturer of the tilIer (such as wheat weights,
counterweights, cabs, and the like).
- Never operate the tiller without good visibility or light.
• Be careful when tilling in hard ground_ The tines may
catch in the ground and propel the tiller forward, tf this
occurs, let go of the handlebars and do not restrain the
machine.
MAINTENANCE AND STORAGE
• Keep machine, attachments, and accessories in safe
working condition.
• Check shear pins, engine mounting bolts, and other
bolts at frequent intervals for proper tightness to be
sure the equipment is in safe working condition.
o Never store the machine with fuel in the fuel tank inside
a building where ignition sources are present, such as
hot water and space heaters, clothes dryers, and the
like. A_low the engine to cool before storing in any
enctosure_
• Always refer to the operator's guide instructions for
important details if the tiller is to be stored for an
extended period.
- IMPORTANT -
CAUTIONS, tMPORTANTS, AND NOTES ARE A MEANS OF A'i-t'RACTING ATTENTION TO IMPO RTANT OR CRITICAL
INFORMATION IN "THIS MANUAL.
CAUTION: Look for this symbol to point
out important safety precautions. It
means--Attention! Become Alert! Your
safety is involved.
IMPORTANT: USED TO ALERT YOU THAT THERE tS A
POSSIBILITY OF DAMAGING THIS EQUIPMENT.
NOTE: Gives essential information that wi]l aid you to better
understand, incorporate, or execute a particular set of instruc-
tions.