Table of Contents
Advertisement
The font selected on the control panel does not print
Software settings override the control panel settings. Use the
font settings in your software.
The wrong characters are printed.
The wrong character table is selected. Change the character
table as described in "Using the Default-Setting Mode" in
Chapter 2.
Printing starts too high or too low on the page.
Adjust the top margin using your software program.
All the text prints on the same line.
Set auto line feed to on in the default-setting mode so that the
printer automatically adds a line-feed code to each carriage
The text prints an extra blank line between each text line.
Set auto line feed to off in the default-setting mode so that two
line-feed signals are not sent. See "Using the Default-Setting
Mode" in Chapter 2.
Line spacing is incorrect. Adjust the line-space setting with
your software.
Printed page length is not as expected.
The page length setting may not match the length of the paper
loaded in the printer. Change the page length setting within
your software to match the paper you are using.
Maintenance and Troubleshooting
3-11
Advertisement
Table of Contents
