Carrier Performance EDGE Owner's Manual page 11

Setting the time and date
You must set the time and date before you can use any
of the thermostat's programming features.
1. Open the door.
2. Press the set button on the left. The screen will show
the word clock on the left and the time on the bottom.
3. To set the hour, press the button underneath the hour,
then press the up or down button on the right. Stop at
the desired hour.
4. To set the minutes, press the button underneath the
minutes, then press the up or down button on the right.
Stop at the desired number.
5. To set the date, press the set button until the screen
displays the word calendar and the date on the bottom
of the screen.
000000
0
000000
_00
0
000000
CD 0 CZD
000000