Replacing Ink Cartridges; Replace Ink Cartridge - Epson Stylus Pro 3800 User Manual

Epson Stylus Pro 3800

Replacing Ink Cartridges

Before you begin a large print job, you should check your ink
levels. If one of your cartridges is low, you can replace it before
you start. Or you can wait until the ink cartridge needs to be
replaced, and then continue the job without any loss of print
quality. However, it is best to replace a low ink cartridge
before starting a large print job.
The easiest way to check ink levels is from the control panel:
1 Matte Black
2 Photo Black
3 Light Black
4 Light Light Black
When the red B ink light is flashing and
the LCD panel, the indicated cartridge is low on ink. Make
sure you have a replacement cartridge.
When the light stays on and you see the LCD message

REPLACE INK CARTRIDGE

must replace the cartridge before you can continue printing.
Use the following UltraChromeK3
Cartridge
Photo Black
Cyan
Magenta
Yellow
Light Cyan
Light Magenta
Light Black
Matte Black
Light Light Black
You can purchase genuine Epson ink and paper from an
authorized Epson reseller. To find the nearest reseller, call
800-GO-EPSON (800-463-7766). Or you can purchase
online at www.epsonstore.com (U.S. sales) or www.epson.ca
(Canadian sales).
14 - Epson Stylus Pro 3800
9 Yellow
8 Light Magenta
7 Light Cyan
6 Magenta
5 Cyan
appears on
INK LOW
, the cartridge is expended. You
Epson ink cartridges:
TM
Product code
T580100
T580200
T580300
T580400
T580500
T580600
T580700
T580800
T580900
Before you start, make sure the printer is turned on. Then
follow these steps to replace an ink cartridge:
1. Note the color of the cartridge whose icon and abbreviation
is on or flashing. This is the cartridge you need to replace.
Caution: Leave the low or expended cartridge in the printer until
you are ready to replace it. To prevent ink reporting errors, never
replace the ink cartridges with the printer turned off.
2. If the red B ink light is on and
appears on the printer's LCD, press the u Ink cover open
button to unlock the ink cover. If the light is flashing and
the LCD message is
button for 3 seconds to unlock the ink cover.
3. Lift the ink cover.
4. Press the ink eject button above the cartridge you need to
replace. The ink cartridge slides out slightly.
12/06
REPLACE INK CARTRIDGE
, you need to hold down the
INK LOW