Special Functions; [Timer]; [Eco]; [Vacation] - Bosch B22CS80 Series Use And Care Manual

Special functions
[timer]
You can use this function to set
a time cycle of 0-99 minutes and
a signal reminds you, e.g. if food is
to be removed from the
compartment after a certain time.
A value of 20 minutes has been
preset at the factory.
Drinks bottles may crack if they
are stored for longer than
20 minutes in the freezer
compartment.
Switching on the [timer]
1. Press the "options" button until
[timer] is selected with a triangle.
2. Activate by pressing the "+"
selection button (function is
framed).
3. Press the "+" and "-" selection
buttons to set the required time.
(Repeatedly press the button to
change the time in one minute
intervals. Holding down the
button increases the time
intervals.)
4. Press the "options" button to
start the time cycle.
Ending a function [timer]
To stop the function, simultaneously
press the "+" and "-" selection
buttons for 3 seconds.
Note
Repeatedly press the button to
change the time in one minute
intervals. If the button is held down,
the time changes in 3 minutes
intervals.
[eco]
The [eco] function switches the
appliance to energy-saving mode.
The appliance automatically sets the
following temperatures:
Refrigerator
compartment: 43 °F (+6 °C)
Freezer compartment: 3 °F (-16 °C)
Switching on the [eco]
1. Press the "options" button until
[eco] is selected with a triangle.
2. Activate by pressing the "+"
selection button (function is
framed).
Switching off the [eco]
1. Press the "options" button until
[eco] is selected with a triangle.
2. Deactivate by pressing the "-"
selection button (function is no
longer framed).
[vacation]
If leaving the appliance for a long
period of time, you can switch the
appliance over to the energy-saving
holiday mode. The temperature in
the refrigerator compartment is
automatically switched over to
57 °F (+14 °C).
Do not store any food in the
refrigerator compartment while in
vacation mode!
Switching on the [vacation]
1. Press the "options" button until
[vacation] is selected with
a triangle.
2. Activate by pressing the "+"
selection button (function is
framed).
Switching off the [vacation]
1. Select [vacation] function until
a triangle is displayed.
2. Switch off by pressing the "-"
selection button (function is no
longer framed).
[clock]
The time is indicated on the time
display panel. The time can be set
with the [clock] function.
Setting the time
1. Press the "options" button until
[clock] is selected with
a triangle.
2. Activate by pressing the "+"
selection button (function is
framed).
Press the "+" or "-" selection
buttons to set the required time.
Press the "options" button to
save the setting time.
,
4.
[]
If the [timer] function is
switched on, the time is not
displayed.
[IWD off]
You can use this function to switch
off the ice and water dispenser.
Before switching off the ice maker,
it is most important that you
switch the water supply to the
appliance off for a few hours.
Empty and clean ice cube container.
Re-attach the ice cube container.
Ensure that the ice cube container
engages with the support.
Switching off [IWD off]
1. Press the "options" button until
the [IWD off] function is selected
with a triangle.
2. Activate by pressing the "+"
selection button (function is
framed).
Switching on [IWD off]
1. Press the "options" button until
the [IWD off] function is selected
with a triangle.
2. Press the "-" button (function is
not framed).
[quick ice]
You can use this function to
accelerate the production of ice
cubes.
Switching on and off
Press the "super/quick ice" button
(only functions if the freezer
compartment, refrigerator
compartment and "cool-fresh"
drawer displays have not been
selected on the display panel).
15