Control And Display Panel - Bosch B22CS80 Series Use And Care Manual

Control and display panel
The fascia and display panel on the Touch the keypad to actuate the
door consists of a touch pad. corresponding function.
2 I
se_ec[
1 I
options
3 4 5
_J[[er cnange
_calEoN
aU_CK me
¢_ rl ¢-,n cJocK
_Ju uu NDofl
time I
6 7
super!
_ O¢0 _ ouick ice
U-i _-
ala[m off/
¢1¢_ (
UU IOCK
8
9
I ................... I
--10
14 13 t2 11
1 "options" button
For selecting the special
functions. Keep pressing the
button until the required function
is selected with an arrow.
See chapter entitled "Special
functions".
2 "select" button
For making settings in the
different temperature zones
(freezer compartment,
refrigerator compartment, "cool-
fresh" drawer). Keep pressing
the button until the required zone
is marked with an arrow on the
display panel.
3 Freezer compartment display
Indicates the current setting in
the freezer compartment.
4 Time display
Indicates the current time or,
if a special function is activated,
the set timer time.
5 Special functions display
Indicates the available special
functions. Activated functions are
highlighted with a frame.
See chapter entitled "Special
functions".
6 "cool-fresh" drawer
(FreshprotectBox) display
Indicates the temperature setting
of the "cool-fresh" drawer.
8
Refrigerator compartment
display
Indicates the current setting in
the refrigerator compartment
area.
"super/quick ice" button
To switch on the Super freeze or
Super cool functions.
See "Super freeze" and "Super
cool" section.
The "quick ice" function can also
be activated for a quicker
production of ice cubes.
See "Special functions" section.
"alarm off/lock" button
The button is used to
- switch offthe warning signal.
See "Acoustic alarm"
section.
- switch the button lock on
and off.
To switch the button lock on and
off, press button for 5 seconds.
When the function is switched
on, "lock" is indicated on the
display panel.
Exception to button lock:
If a warning signal sounds,
the "alarm off/lock" button can
be pressed to switch off the
warning signal.
10 Selection buttons
"+" and "-"
11
12
These buttons are used to
- set temperatures in the
different cooling zones.
- switch special functions on
and off.
On/Off "light" button for ice
and water dispenser
Dispenser button for ice
cubes
13 Dispenser button for crushed
ice
14 Water dispenser button
12