Epson STYLUS Photo EX User Manual page 64

Custom Printing
Note:
If you choose Black for
your Ink setting, the
watermark will be printed
in gray, even if you
selected a color for the
watermark.
If your monitor displays
only 16 colors, the
Intensity adjustments are
not shown in the Layout
graphic. If you choose the
No Halftoning setting, the
Intensity setting does not
determine how your
watermark is printed.
3. Now select the way you want the watermark to appear by
choosing the following options. The Layout graphic
changes to reflect all the settings you choose.
lets you choose a color for your predefined
Color
watermark:
or . You cannot select a color for custom
Yellow
watermarks; they are the same color as the original
PICT file.
sets the lightness or darkness of the
Intensity
watermark (from 5% to 100%) based on where you
move the slidebar.
To adjust the size and position of the watermark, move
the cursor over the Layout graphic. Four boxes appear
in the corners of the graphic and the cursor changes to
a hand.
To move the watermark, click anywhere inside the
graphic and drag it into one of five positions: center,
upper-right, upper-left, lower-right, or lower-left.
To resize the watermark, move the cursor over one of
the corner boxes; the cursor changes to a pointing
hand. Click and drag the box corner to reduce or
enlarge the watermark.
4. If you're finished changing Layout options, click
close the Layout dialog box.
2-34
, , ,
Red Black Blue Aqua
, , ,
Lime Fuchsia
Click and drag
anywhere in here to
move the watermark
Click and drag one of
the corner boxes to
resize the watermark
to
OK