Epson STYLUS Photo EX User Manual page 123

Possible cause
You're using background
printing on a Macintosh.
You're not using ECP mode
and/or DMA transfers.
You cannot print on a Windows NT 4.0 network
Possible cause
Your printer is not set up
correctly as a remote
printer.
Solution
Select EPSON Monitor3 and choose Get Info from the File menu
to increase the Memory Requirements for EPSON Monitor3. See
page 4-16 for more information. If that doesn't work, turn off
background printing (you won't be able to use EPSON Monitor3).
If your computer supports ECP mode and/or DMA transfers, turn
them on to speed up printing. See your computer documentation
for details.
Solution
Be sure the printer software for Windows NT 4.0 is installed on
your computer. Then follow these steps:
1. Click Start, point to Settings, and select Printers.
2. Right-click your printer icon and click Properties.
3. Select a printer port other than lpt1 in the Port menu.
4. From the DOS prompt, type the network path to your printer,
for example, c:\net use lpt2: \\epserver\printer
where lpt2: is your port, epserver is your print server, and
printer is your printer name.
5. Press the Enter key.
6. Restart your computer.
To cancel this setting, type /d instead of the network path to your
printer in step 4, for example, c:\net use lpt2: /d.
6-15
Troubleshooting