Table of Contents
Advertisement
GET TO KNOW
YOUR REMOTE
(M, BR3457)
SPECIAL
FIE'ATURES
AUX+I, AUX+2, AUX+3
Your remote can control up to seven products. If you've
programmed the remote for four products using the "IV, VCR,
CABLE, and AUX keys, you can program it for up to three more
by using AUX+I, +2, +3.
1. Locate the three-digit code for your product in the code table.
2. Press and hold PRG until the indicator lights.
3. Press AUX and "1" simultaneously
to select AUX+I.
4. Enter the three-digit code, then press ENTER. The indicator light
should flash, then tum off to indicate the code was accepted. If the
light stays on, repeat steps 3 and 4 or try a different code.
5. Repeat steps 2 .-4 for AUX+2 and AUX+3.
6. Write your codes on the label inside the battery
compartment
:_'orfuture reference.
Hold down AUX a:ad press 1, 2, or 3 to access AUX +1, +2, or +3
mode.
CABLE BOX VOLUME
Your remote can control cable box volume and muting, if
available on your cable box.
i.
Program Yourc:ablet)0Xcode into the CABLE Orthe AUX key. [
2. Repeat the programming steps, using the same CABLE or AUX [
key as above, but enter special code 3--9-9, followed by ENTER. [
Note: To restore TV volume/mute control to the CABLE or
AUX key, reprogram ybur cable code into that key.
AMPLIFIER VOLUME OVERRIDE
Your remote can override your TV, VCR, or video disc player's
volume functions with your amplifier's volume and muting.
1. Program your amplifier cole into the CABLE or AUX key.
2. Select the key on your remote (TV, VCR, etc.) where you
want the amplifier volume control function to appear. For
example, press 'IV if you want to operate your amplifier's
volume and mute while the remote is in TV mode.
3. Enter special code 4-9-9, l!ollowed by ENTER.
The amplifier volume and mut,z features are now available in the TV
mode.
Notes:
[] To restore normal volume and muting control to your re-
mote, reprogram the remote for the product into each key
(TV, VCR, etc.) to be re_;tored.
[] CD and tape players will automatically select amplifier
volume and mute, if an _mplifier code is programmed into
the remote.
305o-o2-o
8 -- 7
Advertisement
Table of Contents
