Counter Memory; Time Search - Zenith SRV1341 Operating Manual & Warranty

This feature can be used to memorize the beginning
point that you want to review. You can search for it easily
by rewinding or fast forwarding using remote control.
NOTES:
• If the All Repeat or Blank Repeat is set to [ON], the
Counter Memory function does not work.
• If the counter Is not displayed, the Counter
Memory will not be activated. Press C.MEMORY
button so that the counter appears on the display.
1
Stop tape at desired point
Rewind or fast forward the tape to the beginning point
where you want to review. Press C.RESET button to
reset the counter to 0:00:00
2 Select Counter Memory mode
Press C.MEMORY button so
that "MEMORY" appears on the
display.
]
J
MEMORY 0:00:_)
3
Begin recording or playback
Press RECORD or PLAY button.
Press STOP button to end recording or playback.
4 To activate the Counter Memory
Press REWIND (or F.FWD) button. The tape will
automatically stop when the counter returns to 0:00:00
(approx.).
( CAN(JEL THE COUNTER MEMORY
First press C.MEMORY to
display the counter on the
TV/VCR screen. Then, press
C.MEMORY continuously until
"COUNT" appears.
0:0o:0o ]
The Time Search function makes it possible to quickly
advance the tape to your desired position from any
position by entering the exact amount of playback time
of the part that you want to skip.
NOTES:
• Time Search can be set up to 9 hours 50 minutes
(9:50) in 10 minutes increments.
• This function is not operative in recording mode.
Counter Memory function cannot be used in this
mode.
This function only wor_s when a cassette tape is
inserted in the TV/VCR.
In the example below: A program is viewed 2 hour 50
minutes from the present position of the tape.
/ Select "TIME SEARCH"
I" -M....
TIMER PROGRAMMING
Press MENU button to move to .,CTURECO.TRO_
_=L_TTING CLOCK
CHANNEL SET UP
"TIME SEARCH" and then .... '*SE,_
LANGUAGE [ENGLISH
TIME SEAI_CH
press SELECT button. _..... OA_T.ON,
INDEX SEARCH
2
Enter your desired time = r r_EW0_
Press CH • or • button until J-/ **
your desired time appears.
[
EXAMPLE: 2:50 = 2 hrs 50 min
3 Begin Time Search
Press REWIND or F.FWD button. The tape will move
to the specified point in time.
The time counts down as the search progresses. When
0:00 is reached, the tape automatically starts playback.
TO (_',4NCLL"_" THE 17ME SIS'ARCH
Press STOP/EJECT button on the TV/VCR or the
remote control. This will delete the selected time.
-23 - t:IN
61_0(_