Zenith IQDVD2300 Operating Manual page 14

PAGE 14 I CONNECTIONS
You can listen to the sound of audio CDs and DVD video discs in stereo.
F
To AUDIO OUT
(white)
L
To S-VIDEO OUT
S-video cable (supplied)
To VIDEO OUT
To S-video Input
To video input (yellow)
TV or monitor with
audio video inputs
To audio inputs
of the amplifier
(white)
Audio system
J
0 Refer to the owner's manual of your audio system as well.
0 When you connect the DVD video player to other equipment, be sure to tum off the power and unplug all of the equipment from
the walt outlet before making any connections.
o If you place the DVD video player near a tuner or radio, the radio broadcast sound might be distorted. In this case, move the
DVD video player away from the tuner and radio.
0 The output sound of the DVD video player has a wide dynamic range. Be sure to adjust the receiver's volume to a moderate
listening level. Otherwise, the speakers may be damaged by a sudden high volume sound.
0 Turn off the receiver before you connect or disconnect the DVD video player's power cord. If you leave the receiver power on,
the speakers may be damaged.
/_ Warning
Do not set the DigitalAudioOutputof this DVD player to "DolbyDigital"unlessyouare connecting the coaxialdigitalaudiojack of
thisDVD playerto anAV decoderthat has the Dolby Digital(AC-3) decodingfunction, H igh volumesoundmay damageyourhear-
ing as well as the speakers.(Refer to "SelectingDigitalAudioOutput"on page40,)