JVC GZ-HM1 Instructions Manual page 86

Menus
]
REMOTE
Turns on/off reception of the
operation signal from the remote
control.
_
AUTO FINALIZE
Sets the DVD to a readable state.
UPDATE
Updates and improves the camera
software.
Z
FACTORY PRESET
Returns all the camcorder settings to
their default values.
Settings: [ ] = Factory-preset
OFF: Does not receive the signal from the remote control.
[ON]: Enables operation with the remote control.
OFF: Makes created DVDs recordable (not playable on
device other than the camcorder).
[ON]: Finalizes created DVDs so that they can be played
back on DVD burner.
NOTE
•
When you play back a DVD created when [OFF] is set on a
DVD burner, select [FINALIZE] on the DVD creation screen.
(Z p. 74)
•
When you create two or more DVDs at the same time, DVDs
other than the last DVD are finalized automatically even if the
setting is [OFF].
YES: Performs this function.
[NO]: Cancels this function.
NOTE
Information about obtaining system update will be made
available on the JVC's web site.
YES: Performs this function.
[NO]: Returns to the menu screen without executing reset.

EN