Gigabyte GA-H61M-DS2V User Manual page 33

Power On By Keyboard
&
Allows the system to be turned on by a PS/2 keyboard wake-up event.
Note: you need an ATX power supply providing at least 1A on the +5VSB lead.
Disabled

Any Key

Keyboard 98

ACPI Sleep State
&
Specifies the ACPI sleep state when the system enters suspend.
Suspend Disabled

S1 (CPU Stop Clock)

S3 (Suspend to RAM)

Resume by Alarm
&
Determines whether to power on the system at a desired time. (Default: Disabled)
If enabled, set the date and time as following:
Wake up day: Turn on the system at a specific time on each day or on a specific day in a month.

Wake up hour/minute/second: Set the time at which the system will be powered on automatically.

Note: When using this function, avoid inadequate shutdown from the operating system or removal of the
AC power, or the settings may not be effective.
ErP
&
Determines whether to let the system consume less than 1W power in S5 (shutdown) state. (Default:
Disabled)
Note: When this item is set to Enabled, the following functions will become unavailable: PME event wake
up, power on by mouse, power on by keyboard, and wake on LAN.
High Precision Event Timer
&
Enables or disables High Precision Event Timer (HPET) for Windows 7/Vista operating system. (Default:
Enabled)
Soft-Off by PWR-BTTN
&
Configures the way to turn off the computer in MS-DOS mode using the power button.
Instant-Off Press the power button and then the system will be turned off instantly. (Default)

Delay 4 Sec. Press and hold the power button for 4 seconds to turn off the system. If the power

button is pressed for less than 4 seconds, the system will enter suspend mode.
Internal Graphics Standby Mode
&
Allows you to determine whether to let the onboard graphics enter standby mode to decrease power
consumption. (Default: Disabled)
Internal Graphics Deep Standby Mode
&
Allows you to determine whether to let the onboard graphics enter deeper standby mode. (Default:
Disabled)
(Note) Supported on Windows 7/Vista operating system only.
Disables this function. (Default)
Press any key to turn on the system.
Press POWER button on the Windows 98 keyboard to turn on the system.
Disables this function.
Enables the system to enter the ACPI S1 sleep state. In S1 sleep state, the
system appears suspended and stays in a low power mode. The system can
be resumed at any time.
Enables the system to enter the ACPI S3 sleep state. In S3 sleep state, the
system appears to be off and consumes less power than in the S1 state. When
signaled by a wake-up device or event, the system resumes to its working
state exactly where it was left off. (Default)
(Note)
- 33 -