Table of Contents
Advertisement
INSTALLATION
Set-Top Box Connection
to VCPJS-Video
VCR
Follow this diagram
when connecting
the STB to a VCR or S-Video
VCR.
Connect the S-Video or video
cable. See Note below.
TV
) w°Eo
PROGRAM
INPUT
OU T
LAo :
, .. J
NOTE:
S-VIDEO, VIDEO AND AUDIO
CABLES NOT INCLUDED
VCR/S-Video VCR
_INPUT
"_
I
RIAUDIO_L
VIDEO
S'VIDEO
Connect
the
S-Video
or
video cable.
See
N(
below,
Antenna or cable wire
-=//
VCR/S-VIDEO VCR SETUP
Procedure
•
Connect video cable from the NTSC video output jack on the STB to the video input jack on
the VCR/S-Vidao VCR.
OR
•
Connect S-Video cable from the NTSC S-Video output jack on the STB to the S-Video input
jack on the VCPJS-Vidao VCR.
•
Connect audio cables from the left and right NTSC audio output jacks on the STB to the left
and right audio input jacks on the VCR/S-Video VCR.
•
Connect video cable from video output jack on the VCR/S-Video VCR to video input jack on
TV.
OR
•
Connect S-Video cable from S-Video output jack on the VCR/S-Video VCR to S-Video
input jack on IV.
•
Connect audio cables from the left and right audio output jacks on the VCR/S-Video VCR to
the left and right audio input jacks on the "IV.
Note:
Connect either your S-Video or video input/outpuL
S-Videowillprovide better picture quality.
If bothS-Videoand videoare connected,S-Videowilloverridevideo.
[]
Advertisement
Table of Contents
