Panasonic Digital Palmcoder PalmSight PV-DV900 Operating Instructions Manual page 40

Use this feature to record a seven second
(approx.) still image from the current
camera picture. Audio is also recorded for
on the spot narration. Or, you can add
narration later with the Audio Dubbing
feature to make an interesting slide show,
etc. (page 47).
|Ji'l I (o]l _ I I _{'J iiTO]l_o] nlil i[o] ulO_ [1"_L| _ [_'_!_I
MENL
PHOTO SHOT
Button
Button
\
SELECT SET WHEEL
EVF Indication
©
nasIT _Ec
INDEX SEARCH
Button
Before you begin...
• Set the POWER Switch to CAMERA.
Press PHOTO SHOT Button in Record/
Pause mode.
"PHOTO" will appear in the EVF or the
LCD monitor.
• If SHUTTER on the menu screen is
set to ON, a sound effect similar to the
shutter of a film camera will be heard
when the PHOTO SHOT Button is
pressed.
2Set the POWER Switch to VCR.
Press MENU to display the VCR mode
menu screen in the EVF or the LCD
monitor.
Rotate the SELECT SET WHEEL to
select INDEX and press down to select
PHOTO.
Press one of the INDEX SEARCH
Buttons on the remote control
(Optional, page 53) to advance or
rewind the tape to playback a photo
shot scene.
• To view the next photo shot, the
INDEX SEARCH Button must be
pressed again.
Note:
• The picture quality will deteriorate slightly.
• The tape remaining indicator will not
appear while PHOTO SHOT feature is
used.
• When the AUDIO-REC mode is changed,
the shutter sound effect may not be able
to be heard even when SHUTTER is set
to on.
40 For assistance, call 1-800-211-PANA(7262)