Panasonic Digital Palmcoder PalmSight PV-DV900 Operating Instructions Manual page 20

Here are some of the basic indications which appear in the Palmcorder EVF and LCD
Monitor. These indications except the Date and Time will not be recorded on the tape.
b --
C -"
d e
10h12m34s21f I I-P-A-US_ _ '_
IWARNINGI
rVOLUME
[-]llll [+]J
12 : 00 : 00AM
JAN 29 1999
,. j
a. Battery Remaining
m
FULL
EMPTY " E_, -
• When you are using the AC Adaptor, the
Battery Remaining indication may not
show FULL, This is normal.
b. Tape Remaining
(AY-DVM30EA) (AY-DVM60EA)
R0:30 R1:00
! !
- RO:O0- - RO:O0-
• It will take several seconds for the tape
remaining indicator to operate after the
tape starts moving.
c. Digital Zoom (page 39)
This display appears when the digital
zoom function has been activated.
d. Tape Speed Indication (page 17)
Indicates the tape speed (SP or LP).
e.
Display On/Off and Counter/Time Code
The indication switches as shown below
when the desired "DISPLAY" mode is
selected from the menu (page 18).
• Even if display off is selected, the Tape
Mode and Date and Time indication
can be displayed.
t !,
Memory Counter M 0:00.00
The Palmcorder will stop whenever it
reaches the point where the counter was
previously set to M 0:00.00 during audio
dub, fast forward or rewind.
Time Code 0h00m00s00f
The Palmcorder calculates and displays
exactly where you are on any tape in terms
of hours, minutes, seconds, and frames
(30 frames = 1 second).
• This display can not be reset.
IMPORTANT NOTE:
Display must be set to ON for MF, AE,
W. BALANCE or BACK LIGHT indications
to be displayed on the EVF or LCD Panel
when selected.
20 For assistance, call 1-800-211-PANA(7262)