Listening To Radio Broadcasts; Direct Access Tuning - Technics SA-GX550 Operating Instructions Manual

Direct access tuning
Specify the frequency using the numeric buttons to directly tune
to the desired broadcast station.
0
_R _s
C3 ©
m:T_
6
x
32 14
................................................... :1
L_ Press TUNER ..... ,_
• MANUAL
LOCK ..........
S_EAKE_ L" L...J '
m
,_ L...I I.....!.
1 r......... BAND ............ Press BAN D tO select "FM " ""o'r ......... :.F_:....................... __i
I "AM" ...... _.::::_ _.::::;
• I m illu:!nate s L.../L'. --)
DIRECT TUNING Press DIRECT TUNING.
While cursor display is flashing
,__pprox. 4 seconds)
I =-AUTO :_/
MANUAL
LOCK
SPEAKERS
m m xl/
i'i'_
Press the appropriate numeric but-
tons to enter the frequency.
FM frequencies can be entered at tuning intervals of 100
kHz, and AM frequencies at tuning intervals of 10 kHz
If no button is pressed while the cursor display is
flashing, the display will return to the frequency which is
currently being received. To re-specify the frequency,
repeat the procedure from step 3.
If the desired FM frequency is 107.9
MHz
/
%._,oAL QUArtz LOCK =_(
,._RS,._ J f:_ Fi _::_
m _ i /.....I !......!
Illuminates when tuned
When the FM stereo broadcast is received:
This unit will automatically switch to FM stereo reception and the
FM stereo indicator will illuminate.
=.AmO _-_-_-_-_-_-_-_-_-_mz LOCK _B_
MANUAL
LOCK
SPE,KERS STEREO I I'')
/'"') I._)
Illuminates
If noise is excessive in the FM stereo mode
Press FM MODE (The FM stereo indicator will switch off.)
The broadcast will be monaural, but noise will be reduced. If the
button is pressed once more, stereo mode will be resumed.
16