Time Stamp - Panasonic Omnivision VHS PV-C2540 Operating Instructions Manual

This unit writes program data (see example below) for about the
first 10 seconds of every recording.
The information is then displayed during the first 10 seconds of
playback. To change the data, see "Changing Time Stamp Data"
section on next page.
Display MAIN MENU.
Press ACTION*.
[_Check list before you begin.
[] The clock is set to correct time,
[] The record tab is in place,
2
3
4!
SELECT:& • < I_ KEY
SET :ACT t ON KEY
Display SET UP VCR
screen.
1 ) Press AV< •
to select
"VCR."
2) Press ACTION
to display.
_uvc ,tCe'c TiME STAMPr ..
R=_J_T_,_Y : O_F _, ,.,ress . _.o
TIMER PROGRAMMING
''"'='="-"P.e_ w,_,N _ NG , _ , select.
SELEc'r:A v KEY 2) Press • to set
s_ ' :t. _ "ON" or "OFF."
END ,_ACI"ION t<L=Y
• When "OFF" is selected, the
program data is written on the
tape, but will not be displayed.
Return to normal
screen.
Press ACTION twice.
2 SELECT/
SET
UP
v:CH DOWN
)' :VOL UP
< :VOL DOWN
ACTION
<Time Stamp Example >
Normal/One
Touch Recording
i Timer
Recording
Model PV-C2540
remote is shown here.
When Clock
is not set...