Sony Handycam Vision DCR-TRV9 Operating Instructions Manual page 92

To watch the demonstration
You ran watrh a brief demonstration ofpirtures with sperial efferts. If the demonstration
appears when you turn oil the camcorder for the first time, exit the demo mode to use your
calllcorcter.
To enter demo mode
(1) Ejert the rassette and set the POWER switrh to VTR.
(2) While holding down [i:>. set the POWER switch to CAMERA. Tile demonstration starts.
The demonstration stops when you insert tile cassette. NIGHTSHOT should be set to ON
to start demonstration.
Note that once you enter demo mode. this mode is retained as long as tile vanadium
rechargeable battery is in place. Therefbre, demonstration starts automatically 10 minutes
later every time you set tile POWER switch to CAMERA, and after you eject tile cassette.
To exit demo mode
(1) Set the POWER switch to VTR.
(2) While holding down El, set tile POWER switch to CAMERA.
Note on demo mode
When you set NIGHTSHOT to ON in tile menu system, NIGHTSHOT indicator appears in
tile viewfinder or on the LCD screen. At this time. you cannot select DEMO MODE in the
nlentl system.
92