High Limit Reset Access Plug
Thermostat Cover
Power Switch
Trigger
Handle
Fig. A
Amber Indicator Lights
Fig. B
1
Fig. C
Power Light (Left)
Heating Light (Right)
2
Thermostat Adjustment Knob
High Limit Reset Button
To raise the assembly to the 47˚ position
1. Lift by the handle only
2. Raise until assembly locks itself into
place. See Fig. B
Do not squeeze the trigger and
handle together to raise the assembly.
Do not force unit if it does not
move up and down in the prescribed
manner. The assembly may be damaged
by the application of excessive up or down
force. Contact an authorized service agent
if assembly becomes difficult to move.
To lower the assembly
1. Lift slightly from the handle (to take
weight off)
2. Squeeze the trigger towards handle
3. Lower it to the desired position. Do
not allow griddle top to fall to surface.
See Fig. C
5
-
-