Sony BRAVIA KDL-32L4000 Operating Instructions Manual page 36

Other Information
No sound/Noisy sound
Good picture, no sound.
Audio noise.
Wide Mode changes automatically.
"Black box" on screen.
Black bands appear at the top and 17
bottom of the screen.
Certain programs on DVD or other 17
digital sources display a loss of
detail, especially during fast-motion
or dark scenes.
Remote control does not operate. FI
Some digital cable channels are not [7
being displayed.
rq
Lost password. 17
How to reset the TV to factory [7
settings.
Check the vnlume control.
Press MUTING or VOL + so that "Muting" disappears from the screen
(page 21).
Set
Speaker
to On in the Sound settings (page 26). lfit is set to Off, sound is
not output from the TV's speakers regardless of the TV's volume control.
Make sure that the arrtenna is connected using the 75-ohm coaxial cable (not
supplied).
Keep the arrtenua cable away frnm other connecting cords.
To avoid TV irrterference, make sure to use an undamaged arrteuna cable.
The current Wide Mode setting is automatically replaced with the 4:3 Default
setting when you change the channel or vide() input, it"4:3 Default in the Screen
settings is set to anything but Off. If you want to lock in the Wide Mode selected
with the WIDE button, set 4:3 Default to Off in the Screen settings (page 27).
Check the Auto Wide option in the Screen settings (page 27).
You have selected a text option in tire Setup setting and no text is available. (See
pages 33 and 34 to reset Setup selections.) To turn off this feature, set the
Closed Captions (CC) nption to Off. If you were trying to select closed
captioning, select CO1 instead of Text1-4.
Some wide screen programs are filmed in aspect ratios that are greater than 16:9
(this is especially common with theatrical releases). Your TV will show these
programs with black bands at the top and bottom of tire screen. For more details,
check the documentation that came with your DVD (or contact your program
provider).
The compression used by certain digital broadcasts and DVDs may cause your
TV's screen to display less detail than usual, or cause artifacts (small blocks or
dots, pixeladons) to appear on ynur screen. This is due to your TV's large screen
and ability to show very line detail, and is normal lot certain digitally recorded
programs.
Check the polarity of the batteries or replace the batteries.
Point the remote control at the remote control sensor of the TV.
Fluorescent lamps can interlere with your remote control operation; try turning
off the fluorescent lamps.
Keep the remote control sensor area clear from obstacles.
Certain cable companies have limitations on the broadcast of digital cable
channels. Check with your cable cnmpany l\)r more ird\)rmation.
The digital cable channel may be set to Hidden in the Show/Hide Channels
setting (see page 29).
Select the Parental Lock settings on the settings screen, then enter the following
master password: 4357. The master password clears your previous password and
allows you to enter a new password (page 31).
Turn on the TV. While holding down the 'It button on the remote control, press
the POWER button on the TV. (The TV will turn itself of L then back on again.)
Release the tl. button.
WARNING: The Reset will clear all of your customized settings irrcluding
Parental Lock setting.
36