Getting The Most Out Of Dolby Pro Logic; Delay Time - Sony STR-D360Z Operating Instructions Manual

Getting the Most Out of Dolby
Pro Logic Surround Sound
To obtain the best possible Dolby Pro Logic Surround
sound, first select the center mode according to the
speaker system you have. Then, adjust each speaker
volume and delay time.
Note that you must have at least one additional pair of
speakers and/or one center speaker to do the following
adjustments.
CENTER SURROUND SURROUND
LEVEL +/- MODE ON/OFF
I
:::°.. ===
ooo
o .... OOO
I " 1
REAR EFFECT/ SET-UP
LEVEL +/- DELAYTIME
SURROUND_ SURROUND
ON/OFF 1 I CD MODE
DELAY TIME
REAR
LEVEL +/-
TEST TONE
CENTER
LEVEL +/-
V
Selecting the center mode
The receiver offers you four center modes: Phantom, 3
Channel Logic, Normal, and Wide. Each mode is
designed for a different speaker configuration. Select
the mode that best suits your speaker's system
configuration:
1
Press SURROUND ON/OFF to turn on surround
sound.
2 Press SURROUND MODE repeatedly to select the
Dolby surround sound field (PRO LOGIC or
C. STUDIO mode).
3
Press SET-UP repeatedly until the set-up you
want appears in the display. Select the set-up as
follows:
If you have Select Sothat
Front and rear
speakers, no
center speaker
PHANTOM
The sound of the
center channel is
output from the front
speakers.
Front and center 3 CH LOGIC The sound of the rear
speakers, no rear (3 Channel channel is output
speaker Logic) from the front
speakers.
Front and rear
speakers, and a
small center
speaker
NORMAL The bass sound of the
center channel is
output from the front
speakers (because a
small speaker cannot
produce enough
bass).
Front and rear
speakers, and a
large center
speaker
WIDE
For "complete"
Dolby Pro Logic
Surround sound.
(continued)
15