Getting The Most Out Of Dolby Pro Logic Surround Sound - Sony STR-DE515 Operating Instructions Manual

a a a are
Getting the Most Out of Dolby
Pro Logic Surround Sound
To obtain the best possible Dolby Pro Logic Surround
sound, first select the center mode according to the
speaker system you have. Then, adjust each speaker
volume and delay time.
Note that you must have at least one additional pair of
speakers and/or one center speaker to do the following
adjustments.
CENTER SURROUND SURROUND
LEVEL +/- MODE ON/OFF
REAR " EFFECT/ SET-UP
LEVEL +/- DELAY TIME
SURROUND SURROUND
ON/OFF | | MODE
CO
TEST TONE
DELAY TIME
REAR
LEVEL +/-
CENTER
LEVEL +/-
Using Surround Sound
Selecting the center mode
The receiver offers you four center modes: Phantom, 3
Channel Logic, Normal, and Wide. Each mode is
designed for a different speaker configuration. Select
the mode that best suits your speaker's system
configuration:
1 Press SURROUND ON/OFF to turn on surround
sound.
2 Press SURROUND MODE repeatedly to select the
Dolby surround sound field (PRO LOGIC or
C. STUDIO mode).
3 Press SET-UP repeatedly until the set-up you
want appears in the display. Select the set-up as
follows:
If you have Select So that
Front and rear
speakers, no
center speaker
PHANTOM The sound of the
center channel is
output from the front
speakers.
Front and center 3 CH LOGIC
speakers, no rear (3 Channel
speaker Logic)
The sound' of the rear
channel is output
from the front
speakers.
NORMAL The bass sound of the
speakers, and a center channel is
small center output from the front
speaker speakers (because a
small speaker cannot
produce enough
bass).
Front and rear
Front and rear WIDE
speakers, and a
large center
speaker
For "complete"
Dolby Pro Logic
Surround sound.
(continued)
15