Removing Apg Assy - Epson Stylus Photo R310 Service Manual

Stylus Photo R300/R310

2.3.11 Removing APG Assy.

External View
CN7
APG Assy.
Figure 2-26. Removing "APG Assy."
DISASSEMBLY AND ASSEMBLY
Acetate Tape
Hook
Tab
Screwing Tab
C.B.S 3x6 (6-8kgf•cm)
Parts/Units which should be removed before removing "APG Assy."
Paper Support Assy./Housing, Upper/Housing, Middle
Procedure for Removing
1. Disconnect the connector cable of "PG Motor" from CN7 of "Main Board".
2. Release the connector cables of "PF Motor" and "PG Motor" from the
following points.
Acetate tape
Hook of "ASF Assy."
Tab of "Paper Guide, CDR" (x2)
Screwing tab of "Housing, Lower"
3. Remove the screw which secures "APG Assy.". Then, remove "APG Assy.".
Make sure that the hooks (x2) and the dowels (x2) of "APG
Assy." are securely attached to "Frame, Main".
Check if the part indicated in the following figure is inserted in
the slits of "Frame, Main".
It has to be inserted in the
slit of "Frame, Main"
Disassembly
Hook
APG Assy.
Dowel
Figure 2-27. Reinstalling "APG Assy."
Revision A
55