Processor; Main Memory - Intel DQ965WC Product Manual

Desktop board

Hide thumbs Also See for DQ965WC:

Table of Contents

Processor

CAUTION

Failure to use an appropriate power supply and/or not connecting the 12 V (2 x 2 pin)

power connector to the desktop board may result in damage to the board or the

system may not function properly.

Desktop Board DQ965WC supports an Intel processor in the LGA775 package.

Processors are not included with the desktop board and must be purchased separately.

The processor connects to the desktop board through the LGA775 socket.

The supported processors list for Desktop Board DQ965WC is located on the web at:

http://www.intel.com/go/FindCPU

CAUTION

When connected to AC power, the memory slots on the board will be powered and in

use. A red LED, located near the memory slots, will be lit if the memory slots are

powered.

Installing or removing memory from the board while the memory slots are powered

may result in damage to both memory and board.

Before installing or removing memory, disconnect the system from AC power and wait

for the LED to go off before proceeding.

NOTE

To be fully compliant with all applicable Intel

board should be populated with DIMMs that support the Serial Presence Detect (SPD)

data structure. If your memory modules do not support SPD, you will see a

notification to this effect on the screen at power up. The BIOS will attempt to

configure the memory controller for normal operation.

NOTE

The Intel

Management Engine in the chipset requires memory to be populated in

Channel A, DIMM 0 in order for it to enable Intel Quiet System Technology and

Intel Active Management Technology.

Desktop Board Features

SDRAM memory specifications, the

Table of Contents