Running A Printer Check - Epson Stylus Photo R220 Printer Basics Manual

Lights
Red H ink and red
) paper lights flash
alternately
Green P power light is
off; red ) paper and
red H ink lights flashing

Running a Printer Check

You can run a printer check to determine whether a problem comes from the
printer or some other source.
1. Turn off your printer and computer.
2. Disconnect the printer's USB cable.
3. Load letter-size paper in the printer.
4. Hold down the ) paper button, then press and release the P power button.
When printing starts, release the ) paper button.
Explanation
The CD/DVD tray guide was left open when you turned on
the printer or when printing on paper. Close the CD/DVD
tray guide.
Paper may be blocking movement of the print head. Turn
off the printer, then open the cover and remove any
jammed paper or other foreign objects. Turn the printer
back on again. If the lights are still flashing, contact Epson
as described on page 54.
The printer may have an internal error. Turn off the printer,
wait a few seconds, then turn it on again. If the lights are
still flashing, contact Epson as described on page 54.
Diagnosing Printer Problems
45