Cleaning The Rollers; Inserting A Cd Or Dvd - Epson Stylus Photo R200 Printer Basics Manual

Cleaning the Rollers

Before you print on CDs or DVDs, it's a good idea to clean the rollers inside your
printer. You can do this by feeding and ejecting several sheets of plain paper.
1. Make sure your printer is turned on and several sheets of letter-size paper are
loaded.
2. Press the ) button to feed a sheet of paper into the printer.
3. Press the ) button again to eject the paper.
4. Repeat steps 2 and 3 several times.

Inserting a CD or DVD

Make sure the data, music, or video is burned on your ink jet-printable CDs or
DVDs before you print. Otherwise, dirt or scratches on the surface may cause
errors when you burn the data. If you plan to print a large number of CDs or
DVDs, it's a good idea to print a small sample, then wait a day and check the
quality to make sure it's satisfactory.
If you want to check the print position, or color, see the instructions for
"Adjusting the Print Position" on page 41 and "Adjusting the Print Density" on
page 45.
Before you insert a CD or DVD, make sure the printer is turned on. Otherwise,
the disc may not be positioned correctly. Then follow these steps:
1. Push in the output tray extension, but leave the tray open.
2. Open the printer cover and pull down the CD/DVD tray guide.
33
Printing on CDs and DVDs