Initial Camera Setup - Vivitar DVR 943HDv2 User Manual

Initial Camera Setup

Installing the Battery
 Charge before using your camera for the first
time.
To Charge the Lithium Battery:
1. Power Off the camcorder.
2. Make sure the battery is inserted correctly.
3. Connect the camcorder with the USB cable
to the computer or supplied AC Adapter
(which you then plug into an electrical outlet).
4. Allow the battery to charge for at least 4
hours before using the first time.
5. The charge light will turn off when the
battery is fully charged.
Turning On the Camera
Installing the Memory Card
 Insert SD Memory
card (up to 32GB)
before use.
Using the Camera
5
 Important: You must
use a Class 4 SD card
or higher SD card
only.