Initial Camera Setup - Vivitar 610v2 User Manual

Initial Camera Setup

INSTALLING THE BATTERIES
Slide open the battery cover on the
front of the camera. Install 2 x AA
batteries with the correct polarity, as
illustrated inside the battery
compartment. Slide the cover to close
the battery compartment.
Alkaline batteries recommended.
TURNING ON THE CAMERA
INSTALLING THE MEMORY CARD
SD Memory card (up to 32GB) needed for
normal use.
For best video performance, it is strongly
recommended to use a high speed SD
Memory card of Class 4
NOTE: Please turn off the camera before
installing the SD Memory card.
USING THE CAMERA
4
or higher.