Epson PRO Reference Manual page 51

After upgrading your computer to Windows 95, the printer
driver does not work correctly.
You need to reinstall the EPSON Stylus Pro or Pro XL printer
driver using Windows 95. See your Setup and Software Guide for
Windows.
You see error messages on your PC because of printing
conflicts.
Before sending print jobs to the printer, the EPSON Spool
Manager stores them in a temporary directory. If you see error
messages when trying to print or printing is very slow, the
problem may be caused by other temporary files in the
temporary directory. To change the EPSON Spool Manager
default directory, follow these steps:
1. Make a directory on your hard disk to store the Spool
Manager files, for example, C:\SPLTEMP.
2. Open the EPSON program group and double-click the
Spool Manager icon.
3. Make sure Stylus Pro (or Stylus Pro XL) is selected, and then
open the Queue menu.
4. Select Setup. In the Queue Setup dialog box, change the
spool directory to the one you created in step 1.
5. Also make sure the Use Print Manager for this port
checkbox is checked. Then select OK or press Enter.
6. Open the Options menu and select Default Spool Directory.
7. In the dialog box, change the spool directory to the one you
created in step 1. Then select OK.
8. Close the Spool Manager.
3-18
Maintenance and Troubleshooting