Environmental; Safety Approvals; Initialization - Epson Photo 700 User Manual

Environmental

Temperature
Operation
*
Storage
Humidity (without
condensation)
Operation
*
Storage

Safety Approvals

Safety standards
EMC

Initialization

Hardware
initialization
Software
initialization
50 to 95 °F (10 to 35 °C)
4 to 140 °F ( 20 to 60 °C)
– –
1 month at 104 °F (40 °C)
120 hours at 140 °F (60 °C)
20 to 80% RH
5 to 85% RH
*Stored in shipping container
UL 1950 with D3, CSA C22.2 No. 950 with D3
FCC part 15 subpart B class B, CSA C108.8 class B
The printer can be initialized (returned to a fixed set of conditions) in
these ways:
Hardware initialization
Software initialization
When the printer is turned on, the printer mechanism is initialized
and the input data buffer and print buffer are cleared. Printer settings
are returned to their default values. However, the printer mechanism
is not initialized if the printer is turned on within ten seconds after
turning it off. In this case, the printer caps the print head, and ejects
any paper in the paper path.
Software initialization clears the print buffer and returns printer
settings to their default values. However, it does not initialize the
printer mechanism or clear the data buffer.
B-7
Technical Specifications
The printer is turned on.
The printer receives an INIT signal from
the parallel interface.
Software sends an ESC @ (initialize
the printer) command.