Horizontal Positioning; Character Types - Bematech MP-2100 TH User Manual

MP-2100 TH · Revision 1.1

Horizontal Positioning

ASCII Dec
ESC f 0 n 102
ESC Q n 81
ESC I n 108
ESC a n 97

Character Types

ASCII Dec
ESC - n 45
ESC 4 52
ESC 5 53
ESC E 69
ESC F 70
ESC t n 116
ESC S n 83
ESC T 84
ESC N n 78
ESC } n 125
Hex Description
66 Horizontal skipping of n characters.
51 Program right margin to column n
6c Program left margin to column n
61 Aligning the characters. Centering if n=1 or left end alignment if
n=0.
Hex Description
2D Underlined mode on (n=1) or off (n=0).
34 Italic mode on.
35 Italic mode off.
45 Emphasized mode on.
46 Emphasized mode off.
74 Selects code page:
n=2 (CODEPAGE 850 - Default)
n=3 (CODEPAGE 437)
n=4 (CODEPAGE 860)
n=5 (CODEPAGE 858)
53 n=0 (enable superscript characters)
n=1 (enable subscript characters)
54 Disable superscript and subscript modes
4E n=0 (density very weak)
n=2 (density normal)
n=4 (density very strong)
7D n=1 (inverted mode enable)
n=0 (inverted mode disable)
n=1 (density weak)
n=3 (density strong)
19