Recording
Achieve natural colours (white balance)
Restore natural colours according to the light source when colouring has
become unnatural.
After steps
1
Select [
The mode changes as follows depending on whether the underwater mode
(P.41) is ON or OFF.
When OFF:
Automatic
Underwater
Indoor
(incandescent lighting)
Outdoor
Set manually
(see below)
Setting manually
Set colours based on white objects within the required lighting environment.
Set to [
[
] flashes.
• If the [
] continues flashing after setting begins, the setting cannot be
made. (Because the range is too dark, etc.)
• If the [
] flashes during recording, adjustments cannot be completed for
the current subject. Remake the setting until matching the subject.
40
VQT1M34
6
Recording manually
(motion/still pictures)
and
(P.38)
2
].
3/3NEXT
→
→
→
Adjusted automatically
When underwater
In locations with incandescent or halogen lighting
In bright, outdoor conditions
When ideal results cannot be produced with
[
lighting, fluorescent lighting, hotel lighting,
spotlights, sunsets, sunrises, etc.)
].
BACK
BACK
Set the mode.
, When ON:
→
], [
], [
] modes (Mercury lighting, sodium
Fill the entire display with white
subject and begin making setting.
Setting complete when flashing
stops.
(cont.)
Mode displayed
→
→
BACK
BACK
BACK