Table of Contents
Advertisement
9
The "Parallel Port Settings" screen appears. Configure the settings of the
Parallel port and click the [Next] button. Proceed to Step 12.
Setting
Printer name
LPT Port
10
The "Serial Port Settings" screen appears. Configure the settings of the
Serial port and click the [Next] button. Proceed to Step 12.
Setting
Printer name
COM Port
Baud Rate
Data Bits
Stop Bits
Flow Control
Parity
11
The "Ethernet Settings" screen appears. Configure the IP Address of
the TM printer and click the [Next] button. Proceed to Step 12.
Setting
Printer name
IP address
12
The display returns to the "Printer Configuration" screen. All the printer
drivers, configured between Step 8 to Step 11, appear in the list.
To install multiple printer drivers, repeat Step 7 to Step 11. To install the
same printer driver multiple times, click the [Copy] button.
When the settings of the printer drivers are finished, click the [Next]
button.
The printer name you entered at Step 8 is displayed. This cannot be
changed.
Specify the number of parallel port used for connecting the printer.
Usually, the port number is automatically displayed and no setting is
required.
The printer name you entered at Step 8 is displayed. This cannot be
changed.
Specify the number of serial port used for connecting the printer.
Specify the baud rate.
Specify the data bits.
Specify the stop bits.
Specify the method of data flow between the computer and the printer.
Specify the parity.
The printer name you entered at Step 8 is displayed. This cannot be
changed.
Enter the printer IP address.
To find the information about IP Address of the TM printer, see the
Technical Reference Guide of each TM printer.
Chapter 2 Installation and Setup
Description
Description
Description
2
47
Advertisement
Table of Contents
